Headphones Usage

Readers ,

Today I am gonna discuss issues regarding why our headphones get wear and torn at very early days ? What amount we should spend on earphone ? which company earphone we should buy?
what's the best way to use earphone? but in next stage I shall discuss about earphones and headphones.
simply starting with usage
please follow these very tiny precautions which I personally do in my life.

1. Never mistreat the cables -

Near the earpiece or near the jack or near the MIC , these three areas are the most essential kinda a connector to the whole thing the image depicts that these earphone will be destroyed in a month if used and stored in this way.

2.KEEP IN MIND

That pre keeping and post keeping of earphones are playing the most crucial role in the keeping it safe and secure . Guys before using the earphones and after using the earphones how you keep your piece safe and secure will only make them live more longer , hence if you keep it in right order ,then it will never get torn easily.

3.IP Heating / Sweat level Resistance/ Dust Resistance/ ETC
Guys this is very very very important to understand that how we should use.
loose strings or tight strings ., under the cloth or over the cloth , its like stringed attached .
apart from IP ratings,
Well, IP ratings stands for Ingress Protection , that's a more like technical term , but to simply we can say resistance power of dust and water.
"Water-resistant" and "waterproof" are terms that often get used interchangeably, but they shouldn't be. What's needed—and what some manufacturers are loathe to share—is the product's IP rating.
IP stands for Ingress Protection, and after the letters IP there should be two digits. The first digit refers to protection from solids, like dust. 0 means no protection, 6 means total protection, and X typically means that, while the manufacturer didn't necessarily test for protection against solids, the assumption is that the product has some level of protection. In other words, X in an IP rating means something like "better than 0, but beyond that, we're not sure so don't sue us."
the second digit in an IP rating refers to protection against liquids. 0 is, again, nothing, and 8 is excellent—that means the product can be submerged up to 1 meter (perhaps beyond) and withstand some fairly high-pressure water from, say, a faucet or a torrential downpour, and not suffer damage. So, IPX8 means you can assume the protection against solids is better than zero, and the protection against liquids is top-notch. IP68 means the product is as protected from ingress of the solid and liquid varieties as can be.
When manufacturers say their products are water-resistant without listing an IP rating, and then when pressed for an IP rating (by me), they often produce an underwhelming rating of, say, IPX4. IPX4 essentially means that low-pressure water won't harm the headphones—but we're talking about light rain, sweat, or mist from a spray bottle. Rinsing the headphones under a faucet could certainly do some damage. And dunking them in the pool can, too.
So if you're using your headphones for exercise at the gym, in the rain, near the pool, and rinsing them off after, they need an IP rating like IPX7 or IPX8. If your "waterproof" earphones are regularly dying after a few visits to the gym, it's possible that in reality they're only rocking an IPX4 rating.
If you don't know your product's IP rating and it's not in the manual or online, you can always try asking the manufacturer directly or posting a question on the product's webpage. The manfacturer knows the rating—and if it's IPX7 or IPX8, it's probably already listed because they know it's a selling point.
4. Blasting the volume
This is far less likely and common when using mobile devices as sound sources, but it's still possible. Stereo gear or studio equipment outputs can drive your headphones to much higher levels, however, and at some point, driver damage can occur. The good news is, you can avoid this by just keeping the volume at moderate levels. And hey, bonus points: You'll avoid damaging your ears this way, too.
5.Lastly Price Tag
Aaaaah! the most important and crucial part of buying an headphone.
And now we come to the simple truth we all know in our hearts: Cheaper things cost less money to make, and are often made with lower-grade materials and less attention to detail and overall quality. The good news is, in recent years, cheap headphones
have started to sound a whole lot better—the ability for inexpensive drivers to reproduce powerful (or somewhat powerful) bass response is one of the main reasons.
Electronics aren't made to last forever, but when the materials and components actually have a semblance of value, and they're assembled with higher standards of quality control than we'll typically see in a budget product, there's an excellent chance those headphones are going to have a longer life. There's another factor at play, as well. If you spend more on a pair of headphones, you're more likely to take better care of them, perhaps out of paranoia that you'll break them.
Ultimately, go with what you can afford, just don't get the absolutely cheapest option unless you're prepared to buy it again a few times. Invest in quality headphones with removable cables, and treat them well—you'll spend less money in the long run and enjoy better audio as a result.